Courses

All Course Bloodborne & Airborne Pathogens Trainer Event Free Conference & Expo Defensive Driving ASC Train the Trainer OSHA CRSC

Supervisor’s Safety Development Program Train The Trainer

The  National Safety Council Supervisor’s Safety Development Program (SSDP) trains supervisors and managers to incorporate best safety practices into their daily management activities. Supervisors will acquire the knowledge, leadership skills and methods to apply safety as part of their responsibilities and become your most effective safety leaders and advocates. A key feature of the program […]

Supervisors Development

Train supervisors to Lead Safety Improvement The NSC Supervisors’ Safety Development Program (SSDP) trains supervisors and managers to incorporate best safety practices into their daily management activities. Supervisors will acquire the knowledge, leadership skills and methods to apply safety as part of their responsibilities and become your most effective safety leaders and advocates. A key […]

Silica Competent Person Trainer Course

Are You Ready for OSHA’s Respirable Crystalline Silica Standard? Competent Person Train the Trainer Course at the Chesapeake Region Safety Council presented by The Law office of Adele L. Abrams P.C. What is a Competent Person under the OSHA Construction Standard for Respirable Crystalline Silica?  It is someone who has the knowledge to identify and the […]

Mobile Elevating Work Platforms (MEWP) Trainer Course

This is a comprehensive training program for Mobile Elevating Work Platforms (MEWP)  to prepare employees to train on hazard identification, inspection and safe operating practices back at their facility. Upon completion of this course attendees will have the skills and knowledge necessary to ensure safe work practices and procedures. Topics Include: Inspection of potential work […]

Scaffold Trainer

This program provides the elements to develop a good Scaffold Safety Training Program to include: Determine Scaffold training needs Identify goals and objectives Develop learning activities (i.e., lecture, on-the-job, hands-on, discussion, or a combination of all of these) Conduct the training – each student will be responsible to develop and present an assigned topic on […]

Scaffold Safety

Employers must have a “competent person” to determine the feasibility and safety of protection for employees erecting or dismantling supported scaffolds. Employers must protect employees from scaffold related hazards such as falls, falling objects structural instabilities, electrocution, or overloading. Topics Include: General Requirements & Definitions Fall Protection & Falling Object Projection Scaffold Platforms Safe Access […]

Safety Training Methods – National Safety Council

Safety Training Methods focuses on the knowledge and skills required to assess your training needs, as well as plan, organize, create, and deliver performance-based safety and health training programs. While emphasis is on developing and delivering instructor-lead/classroom training, you’ll become acquainted with other instructional methods and media used to effectively train employees on safety and […]

Safety Management Techniques – National Safety Council

Safety Management Techniques (SMT) is designed to assist safety and health professionals who are responsible for managing employees and/or projects in safety and health efforts. SMT is part of the curriculum toward achieving the Advanced Safety Certificate. Attend this course if you are coordinating, supervising, or managing safety and health efforts at your facility/company. Designed […]

Safety Inspections – National Safety Council

This workshop provides an overview of the safety and health inspection process, then examines specific techniques to improve the process. Participants learn to develop and use checklists in continuous and formal safety inspections. Topics Include: Pre-inspection tasks What to inspect and where to gather information Recording observations Handling employee reactions to the inspection process Developing […]

Risk Management Part III– Risk Control Measures, Program Management And The Return On Investment

The third and final part of our series addresses the topic of risk control techniques and other relevant aspects of a risk management program to eliminate, or minimize, losses to your assets.  Understanding the basics of risk control techniques is an important step in establishing a risk management program for your organization. Other business issues that directly affect your risk […]

Risk Management Part II – Risk Financing – Cost Effective Insurance And Claims Management

Risk Financing – Cost Effective Insurance and Claims Management This program builds on the foundation established in Part I – Risk Management – What It Is and How It Works for You. This second in our series will first touch on an overview of available risk management techniques and then focus on risk financing methods. […]

Risk Management Part I – Risk Management – What It Is And How It Works

RISK MANAGEMENT PART I – RISK MANAGEMENT – WHAT IT IS AND HOW IT WORKSA key question asked of many safety and health professionals by business and finance executives is: Do safety and health management programs improve a company’s bottom line? The answer is indisputable – “YES”. In addition to direct savings on worker’s compensation […]

Rigger & Signal Person Trainer Course

Participants will learn to prevent incidents that result in property damage, injury, and death, related to the rigging and signal-person duties of operation of cranes when used in construction, demolition, and maintenance. This day and a half training is for individuals who work under the supervision of a competent person and on a routine basis […]

Rigger & Signal Person Training

This training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts, or the erection, dismantling, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction […]

Respiratory Protection Trainer

An estimated 5 million workers are required to wear respirators in 1.3 million workplaces throughout the United States. Respirators protect workers against insufficient oxygen environments, harmful dusts, fogs, smokes, mists, gases, vapors, and sprays. These hazards may cause cancer, lung impairment, diseases, or death. Compliance with the OSHA Respiratory Protection Standard could avert hundreds of […]

Reasonable Suspicion For Supervisors Trainer Course

This course is designed to help you meet the DOT training requirements for supervisors of covered safety-sensitive employees as described in 49 CFR Part 40. Introduction: Purpose and Scope Other Resources Reasonable Suspicion Employer’s Responsibilities (40.11-40.27) Alcohol Suspicion Drug Suspicion Signs and Symptoms Education and Training: Signs & Symptoms of Alcohol & Controlled Substances Use […]

Principles Of Occupational Safety And Health (POSH) – National Safety Council

POSH is an intensive course covering topics which will give you a firm foundation in the fundamentals of workplace safety and health. This course curriculum with important safety concepts and emphasis on best practices builds a core for implementing and managing a safety program. Nationally recognized safety curriculum based on proven best practices Develops critical […]

Opioids – What You Need To Know

CRSC – Opioids in the Workplace – Roundtable Discussion and Presentation According to the National Institute on Drug Abuse, every day, more than 115 people in the United States die after overdosing on opioids. The Centers for Disease Control and Prevention estimates that the total “economic burden” of prescription opioid misuse alone in the United States […]

OSHA 30 Hour For Construction Industry – Spanish

Facilitators identify safety and health principles that help you meet OSHA requirements. Special emphasis is placed on areas in construction that most commonly result in worker injury or property damage. You are also briefed on basic instructional approaches, improving compliance communication, and training at the work site. Topics Include but not limited to: Introduction to […]

OSHA 30 Hour For Construction Industry

Facilitators identify safety and health principles that help you meet OSHA requirements. Special emphasis is placed on areas in construction that most commonly result in worker injury or property damage. You are also briefed on basic instructional approaches, improving compliance communication, and training at the work site. Topics Include but not limited to: Introduction to […]

OSHA 30 Hour For General Industry

This training program is intended to provide entry level general industry workers information about their rights, employer responsibilities and how to identify, abate, avoid and prevent job related hazards on a job site. The training covers a variety of general industry safety and health hazards which a worker may encounter. Topics include but not limited […]

OSHA 10 Hour For Construction Industry – Spanish

Facilitators identify safety and health principles that help you meet OSHA requirements. Special emphasis is places on areas in construction that most commonly result in worker injury or property damage. You are also briefed on basic instructional approaches, improving compliance communication, and training at the work site. Topics include but not limited to: Introduction to […]

OSHA 10 Hour For Construction Industry

Learn to identify safety and health principles that help you meet OSHA requirements. Special emphasis is placed on areas in construction that most commonly result in worker injury or property damage. Students are also are also briefed on basic instructional approaches, improving compliance communication, and training at the work site. Topics include but not limited […]

OSHA 10 Hour For General Industry

This training program is intended to provide entry level general industry workers information about their rights, employer responsibilities and how to identify, abate, avoid and prevent job related hazards on a job site. The training covers a variety of general industry safety and health hazards which a worker may encounter. Topics include but not limited […]

NFPA70E – Electrical Safe Work Practices

NFPA 70E compliance saves lives, reduces liability, and helps avoid unexpected downtime and revenue loss. Learn what’s new &  what’s changed in the new 2021 NFPA 70E. In a fraction of a second, an electrical incident can claim lives and cause permanently disabling injuries. In fact, hundreds of deaths and thousands of burn injuries occur each year […]

Math Review For Certification Exams

This is an intensive review of essential math skills. This workshop is specifically designed for those preparing for certification examinations (ASP, CSP, CHST, OHST) and needing a hands-on review of essential skill areas. What you will learn: 1. Conversions – SI and English conversions of mass, length and time 2. Dimensional analysis – multi-step conversions […]

Job Safety Analysis – National Safety Council

Job Safety Analysis (JSA) is a proven process for controlling operating hazards and costs. Get a step-by-step overview of the process, and define your role in making it effective. Through lecture, demonstrations, and workshops, you’ll learn how to develop and manage a JSA program in your workplace. You’ll also learn how to enlist participation from […]

Incident Investigation – National Safety Council

Training goal – To focus on techniques for gathering complete, accurate and objective accident data used to arrive at true root causes and determine corrective action. To further examine and analyze data as a means of preventing injuries, property damage and financial losses. What you will learn: Employ effective investigation and interview techniques Analyze accidents […]

Lift Truck Trainer Course

This OSHA compliant, comprehensive program covers every aspect of lift truck training and any operator, at every level of experience will benefit from the course. What you will learn: OSHA Powered Industrial Truck Standard 1910.178 and 1926.602 compliance How to evaluate operators’ performance How to educate nonoperators about working safely around powered industrial trucks How […]

Lift Truck Operator

Course covers (AKA Forklift) OSHA reminder points Pre-start safety inspections Design considerations (although there are many different types of lift trucks, there are certain basic design and operating principles) Moving the truck (scanning for hazards, operating safely around pedestrians, keeping a safe following distance behind other trucks, etc.) Setting down the load (positioning the truck […]