BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Chesapeake Region Safety Council - ECPv6.17.5//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Chesapeake Region Safety Council
X-ORIGINAL-URL:https://www.chesapeakesc.org
X-WR-CALDESC:Events for Chesapeake Region Safety Council
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20280312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20281105T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270426T080000
DTEND;TZID=America/New_York:20270429T160000
DTSTAMP:20261009T141936Z
CREATED:20261009T141915Z
LAST-MODIFIED:20261009T141936Z
UID:10001427-1808726400-1809014400@www.chesapeakesc.org
SUMMARY:OSHA 511 - Occupational Safety and Health Standards for General Industry
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-511-pub-2027-003/
LOCATION:Baltimore\, MD\, 2555 Lord Baltimore Dr Ste M-R\, Baltimore\, MD\, 21244\, United States
CATEGORIES:Outreach Training Program
ATTACH;FMTTYPE=image/png:https://www.chesapeakesc.org/wp-content/uploads/2023/03/511-Gears.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270423T080000
DTEND;TZID=America/New_York:20270423T160000
DTSTAMP:20260819T173131Z
CREATED:20260819T173119Z
LAST-MODIFIED:20260819T173131Z
UID:10001375-1808467200-1808496000@www.chesapeakesc.org
SUMMARY:Respiratory Protection Trainer
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/crsc-4617-pub-2027-001/
LOCATION:Baltimore\, MD\, 2555 Lord Baltimore Dr Ste M-R\, Baltimore\, MD\, 21244\, United States
CATEGORIES:Trainer Course
ATTACH;FMTTYPE=image/png:https://www.chesapeakesc.org/wp-content/uploads/2019/09/Respiratory-Protection-Trainer.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270419T080000
DTEND;TZID=America/New_York:20270422T160000
DTSTAMP:20260807T180152Z
CREATED:20260807T180120Z
LAST-MODIFIED:20260807T180152Z
UID:10001277-1808121600-1808409600@www.chesapeakesc.org
SUMMARY:OSHA 2225 - Respiratory Protection
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-2225-pub-2027-001/
LOCATION:Baltimore\, MD\, 2555 Lord Baltimore Dr Ste M-R\, Baltimore\, MD\, 21244\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/OSHA-2225.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270419T080000
DTEND;TZID=America/New_York:20270421T160000
DTSTAMP:20260807T171101Z
CREATED:20260807T171052Z
LAST-MODIFIED:20260807T171101Z
UID:10001269-1808121600-1808323200@www.chesapeakesc.org
SUMMARY:OSHA 502 - Update for Construction Industry Outreach Trainers
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-502-pub-2027-003/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Outreach Training Program,Trainer Course,Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/construction-workers-22.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270412T080000
DTEND;TZID=America/New_York:20270414T160000
DTSTAMP:20261009T141643Z
CREATED:20261009T141623Z
LAST-MODIFIED:20261009T141643Z
UID:10001425-1807516800-1807718400@www.chesapeakesc.org
SUMMARY:OSHA 3015 - Excavation\, Trenching\, and Soil Mechanics
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-3015-pub-2027-001/
LOCATION:Richmond\, VA\, 1600 East Parham Road\, Richmond\, VA\, 23228\, United States
ATTACH;FMTTYPE=image/png:https://www.chesapeakesc.org/wp-content/uploads/2019/09/OSHA7410.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270409T080000
DTEND;TZID=America/New_York:20270409T160000
DTSTAMP:20260819T172920Z
CREATED:20260819T172908Z
LAST-MODIFIED:20260819T172920Z
UID:10001373-1807257600-1807286400@www.chesapeakesc.org
SUMMARY:Lift Truck Operator
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/nsc-1019-pub-2027-001/
LOCATION:Baltimore\, MD\, 2555 Lord Baltimore Dr Ste M-R\, Baltimore\, MD\, 21244\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/Dan-Kellum-Lift-Truck-TTT-10.8.20-rotated.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270405T080000
DTEND;TZID=America/New_York:20270408T160000
DTSTAMP:20261021T182553Z
CREATED:20261021T182519Z
LAST-MODIFIED:20261021T182553Z
UID:10001465-1806912000-1807200000@www.chesapeakesc.org
SUMMARY:OSHA 510 - Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-510-pub-2027-011/
LOCATION:Roanoke\, VA\, 108 N Jefferson St Ste 201-C\, Roanoke\, VA\, 24016\, United States
CATEGORIES:Outreach Training Program
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/construction-site-woman-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270405T080000
DTEND;TZID=America/New_York:20270408T160000
DTSTAMP:20260806T201221Z
CREATED:20260806T201212Z
LAST-MODIFIED:20260806T201221Z
UID:10001257-1806912000-1807200000@www.chesapeakesc.org
SUMMARY:OSHA 510 - Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-510-pub-2027-005/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Outreach Training Program,Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/construction-site-woman-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270322T080000
DTEND;TZID=America/New_York:20270326T160000
DTSTAMP:20261027T181626Z
CREATED:20261026T174903Z
LAST-MODIFIED:20261027T181626Z
UID:10001469-1805702400-1806076800@www.chesapeakesc.org
SUMMARY:Risk Management Fundamentals Certificate Program
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/crsc-4314-pub-2027-001/
LOCATION:Baltimore\, MD\, 2555 Lord Baltimore Dr Ste M-R\, Baltimore\, MD\, 21244\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/AdobeStock_33924912-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270319T080000
DTEND;TZID=America/New_York:20270319T163000
DTSTAMP:20260807T170804Z
CREATED:20260807T170755Z
LAST-MODIFIED:20260807T170804Z
UID:10001267-1805443200-1805473800@www.chesapeakesc.org
SUMMARY:OSHA 7210 - Pandemic Illness Preparedness
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-7210-pub-2027-001/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2020/09/cv-19-300x282-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270318T080000
DTEND;TZID=America/New_York:20270318T160000
DTSTAMP:20261009T135359Z
CREATED:20261009T135333Z
LAST-MODIFIED:20261009T135359Z
UID:10001423-1805356800-1805385600@www.chesapeakesc.org
SUMMARY:Fall Protection Trainer
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/crsc-4592-pub-2027-001/
LOCATION:Roanoke\, VA\, 108 N Jefferson St Ste 201-C\, Roanoke\, VA\, 24016\, United States
CATEGORIES:Trainer Course
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2020/10/Tom-M-VILT-image-show-and-tell-e1603373489975.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270317T080000
DTEND;TZID=America/New_York:20270317T120000
DTSTAMP:20261027T130848Z
CREATED:20261027T130819Z
LAST-MODIFIED:20261027T130848Z
UID:10001471-1805270400-1805284800@www.chesapeakesc.org
SUMMARY:Defensive Driving 4 Hour Course
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/nsc-1218-4hr-pub-2027-001/
LOCATION:Owings Mills\, MD\, 10220 South Dolfield Road Suite 104\, Owings Mills\, MD\, 21117\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2024/10/defensive-driving-1024x576-1.jpeg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270315T080000
DTEND;TZID=America/New_York:20270317T160000
DTSTAMP:20261009T134201Z
CREATED:20261009T134138Z
LAST-MODIFIED:20261009T134201Z
UID:10001421-1805097600-1805299200@www.chesapeakesc.org
SUMMARY:OSHA 3115 - Fall Protection
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-3115-pub-2027-002/
LOCATION:Roanoke\, VA\, 108 N Jefferson St Ste 201-C\, Roanoke\, VA\, 24016\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/fall-hazard-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270308T080000
DTEND;TZID=America/New_York:20270311T160000
DTSTAMP:20261009T132528Z
CREATED:20261009T132503Z
LAST-MODIFIED:20261009T132528Z
UID:10001419-1804492800-1804780800@www.chesapeakesc.org
SUMMARY:OSHA 510 - Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-510-pub-2027-008/
LOCATION:Richmond\, VA\, 1600 East Parham Road\, Richmond\, VA\, 23228\, United States
CATEGORIES:Outreach Training Program
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/construction-site-woman-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270308T080000
DTEND;TZID=America/New_York:20270311T160000
DTSTAMP:20261008T203235Z
CREATED:20261008T203214Z
LAST-MODIFIED:20261008T203235Z
UID:10001417-1804492800-1804780800@www.chesapeakesc.org
SUMMARY:OSHA 501 - Trainer Course in Occupational Safety and Health Standards for General Industry
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-501-pub-2027-002/
LOCATION:Baltimore\, MD\, 2555 Lord Baltimore Dr Ste M-R\, Baltimore\, MD\, 21244\, United States
CATEGORIES:Outreach Training Program,Trainer Course
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/AdobeStock_102438225-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270308T080000
DTEND;TZID=America/New_York:20270311T160000
DTSTAMP:20260811T173312Z
CREATED:20260811T173301Z
LAST-MODIFIED:20260811T173312Z
UID:10001291-1804492800-1804780800@www.chesapeakesc.org
SUMMARY:Safety Training Methods
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/nsc-1153-pub-2027-001/
LOCATION:Baltimore\, MD\, 2555 Lord Baltimore Dr Ste M-R\, Baltimore\, MD\, 21244\, United States
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2021/08/Social-Distancing-Rod-Markleys-Class-3.18.20-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270301T080000
DTEND;TZID=America/New_York:20270304T160000
DTSTAMP:20261030T181437Z
CREATED:20261030T181406Z
LAST-MODIFIED:20261030T181437Z
UID:10001489-1803888000-1804176000@www.chesapeakesc.org
SUMMARY:OSHA 500 - Trainer Course in Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-500-pub-2027-008/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Outreach Training Program,Trainer Course,Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/construction-safety-1-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270301T080000
DTEND;TZID=America/New_York:20270304T160000
DTSTAMP:20260806T195945Z
CREATED:20260806T195937Z
LAST-MODIFIED:20260806T195945Z
UID:10001249-1803888000-1804176000@www.chesapeakesc.org
SUMMARY:OSHA 510 - Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-510-pub-2027-002/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Outreach Training Program,Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/construction-site-woman-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270301T080000
DTEND;TZID=America/New_York:20270303T160000
DTSTAMP:20260807T170230Z
CREATED:20260807T170220Z
LAST-MODIFIED:20260807T170230Z
UID:10001263-1803888000-1804089600@www.chesapeakesc.org
SUMMARY:OSHA 503 - Update for General Industry Outreach Trainers
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-503-pub-2027-002/
LOCATION:Baltimore\, MD\, 2555 Lord Baltimore Dr Ste M-R\, Baltimore\, MD\, 21244\, United States
CATEGORIES:Outreach Training Program,Trainer Course
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/warehouse-workers-checking-inventory-consulting-each-other-about-organization-distribution-goods-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270226T080000
DTEND;TZID=America/New_York:20270226T160000
DTSTAMP:20261009T201230Z
CREATED:20261009T201210Z
LAST-MODIFIED:20261009T201230Z
UID:10001461-1803628800-1803657600@www.chesapeakesc.org
SUMMARY:OSHA 7300 - Understanding OSHA's Permit-Required Confined Space Standard
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-7300-pub-2027-001/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Virtual Instructor Led Training
ATTACH;FMTTYPE=image/png:https://www.chesapeakesc.org/wp-content/uploads/2019/09/OSHA7300.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270226T080000
DTEND;TZID=America/New_York:20270226T160000
DTSTAMP:20260811T164154Z
CREATED:20260811T164144Z
LAST-MODIFIED:20260811T164154Z
UID:10001287-1803628800-1803657600@www.chesapeakesc.org
SUMMARY:Ergonomics: Managing for Results
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/nsc-1035-pub-2027-001/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/AdobeStock_61692293.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270225T080000
DTEND;TZID=America/New_York:20270226T160000
DTSTAMP:20261103T193559Z
CREATED:20261103T193531Z
LAST-MODIFIED:20261103T193559Z
UID:10001507-1803542400-1803657600@www.chesapeakesc.org
SUMMARY:Rigger & Signal Person Trainer Course
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/crsc-4029-pub-2027-001/
LOCATION:Baltimore\, MD\, 2555 Lord Baltimore Dr Ste M-R\, Baltimore\, MD\, 21244\, United States
CATEGORIES:Trainer Course
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/rigger-training-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270225T080000
DTEND;TZID=America/New_York:20270225T160000
DTSTAMP:20260811T163756Z
CREATED:20260811T163746Z
LAST-MODIFIED:20260811T163756Z
UID:10001285-1803542400-1803571200@www.chesapeakesc.org
SUMMARY:Job Safety Analysis
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/nsc-1450-pub-2027-001/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/JSA.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270224T080000
DTEND;TZID=America/New_York:20270224T160000
DTSTAMP:20260811T163352Z
CREATED:20260811T163343Z
LAST-MODIFIED:20260811T163352Z
UID:10001283-1803456000-1803484800@www.chesapeakesc.org
SUMMARY:Safety Inspections
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/nsc-1276-pub-2027-001/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/Safety-Inspections.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270223T080000
DTEND;TZID=America/New_York:20270223T160000
DTSTAMP:20260925T174927Z
CREATED:20260811T162851Z
LAST-MODIFIED:20260925T174927Z
UID:10001281-1803369600-1803398400@www.chesapeakesc.org
SUMMARY:Incident Investigation
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/nsc-1940-pub-2027-001/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/Incident-Investigation-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270222T080000
DTEND;TZID=America/New_York:20270225T160000
DTSTAMP:20261009T195542Z
CREATED:20261009T195521Z
LAST-MODIFIED:20261009T195542Z
UID:10001459-1803283200-1803571200@www.chesapeakesc.org
SUMMARY:OSHA 2015 - Hazardous Materials
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-2015-pub-2027-001/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/hazard-material-sign-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270222T080000
DTEND;TZID=America/New_York:20270225T160000
DTSTAMP:20260806T184418Z
CREATED:20260806T184410Z
LAST-MODIFIED:20260806T184418Z
UID:10001243-1803283200-1803571200@www.chesapeakesc.org
SUMMARY:OSHA 500 - Trainer Course in Occupational Safety and Health Standards for the Construction Industry\, Spanish
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-500-pub-2027-001/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Outreach Training Program,Spanish,Trainer Course,Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/construction-safety-1-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270222T080000
DTEND;TZID=America/New_York:20270222T160000
DTSTAMP:20260807T181820Z
CREATED:20260807T181620Z
LAST-MODIFIED:20260807T181820Z
UID:10001279-1803283200-1803312000@www.chesapeakesc.org
SUMMARY:Team Safety
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/nsc-1491-pub-2027-001/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/Team-Safety.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270216T180000
DTEND;TZID=America/New_York:20270226T213000
DTSTAMP:20261030T180907Z
CREATED:20261030T180839Z
LAST-MODIFIED:20261030T180907Z
UID:10001487-1802800800-1803677400@www.chesapeakesc.org
SUMMARY:OSHA 500 - Trainer Course in Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-500-pub-2027-007/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Outreach Training Program,Trainer Course,Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/construction-safety-1-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20270216T080000
DTEND;TZID=America/New_York:20270219T160000
DTSTAMP:20261030T173536Z
CREATED:20261009T195159Z
LAST-MODIFIED:20261030T173536Z
UID:10001457-1802764800-1803052800@www.chesapeakesc.org
SUMMARY:OSHA 510 - Occupational Safety and Health Standards for the Construction Industry
DESCRIPTION:Participants will learn to prevent incidents that result in property damage\, injury\, and death\, related to the rigging and signal-person duties of operation of cranes when used in construction\, demolition\, and maintenance. This 2 day training is for individuals who work under the supervision of a competent person and on a routine basis perform rigging work engaged in lifting loads other than rigging for special lifts\, or the erection\, dismantling\, jumping or reconfiguring of cranes or all of these. This person is also trained to communicate guidance and direction to a crane operator in lifting\, hoisting\, moving\, or releasing a load. \n \nUpon completion of this course\, employees shall be able to demonstrate specific knowledge of the following: \n\nHand\, voice and radio communications\nProficiency in hand and verbal signals\, including the standard method for hand signals as required by ASME B30.3-2004\, ASME B30.5-2007 and ASME B30.6-2003\nRigging hardware\, including hooks and similar attaching devices\, shackles\, clips\, clamps and taglines\nSynthetic/wire rope slings\nCommon load configurations and positioning\nPersonal fall protection methods\nEmergency procedures\nHazards and restrictions associated with working adjacent to overhead electric lines and equipment.\n\n  \nCourse Includes: Full training kit\, rigging handbook\, electronic resources\, lunch and refreshments. \n \nFull training kit – wire rope sling\, wire rope clips\, fist grips\, grade 70 transport chain\, grade 80 alloy chain\, shackle\, eye hook\, wire rope with lay removed\, damage wire\, & turnbuckle with equipment bag.
URL:https://www.chesapeakesc.org/class/osha-510-pub-2027-010/
LOCATION:Virtual Instructor Led Training
CATEGORIES:Outreach Training Program,Virtual Instructor Led Training
ATTACH;FMTTYPE=image/jpeg:https://www.chesapeakesc.org/wp-content/uploads/2019/09/construction-site-woman-scaled.jpg
END:VEVENT
END:VCALENDAR